Latest Products
-
Genuine Toyota Front Corner Park Assist Kit For Massive Gray (1L6)
$344.72
-
Genuine Toyota Rear Park Assist Kit For Massive Gray (1L6)
$285.23
-
Genuine Toyota Front Corner Park Assist Kit For Frosted White (089)
$350.00
-
Genuine Toyota Rear Park Assist Kit For Silver Me. (1L0)
$285.23
-
Genuine Toyota Rear Park Assist Kit For Frosted White (089)
$285.23
-
Does not include battery. Battery must be no more than 20kgs, 190mm high,176mm wide & 277mm Long. Suits 4×4 and Hi-Rider diesel variants only
-
Not winch compatible.
If fitted on WorkMate grades, must fit genuine accessory sidesteps or tray (or similar) to meet regulations.
Must order Bullbar Patch Harness (PZQ8589235).Max. limits for antenna installation-
Base OD: 42mm; Mass: 1.4kg, Height: 1.2m (RH) or 0.73m (LH).
Due to TSS zone, must fit to outboard area only. -
Required when fitting Compact Size LED Light Bar on Alloy Bullbars
Images are for display purposes only and may differ from actual product.
-
Applicable for Nudgebars only.
Required when fitting Comet FF450 driving lights to vehicles with fuse box fitted. -
Extra Cab & Single Cab, MT, Front Only
-
2-head kit.
Applicable to Narrow and Wide Body variants, except for Rugged X.
Compatible with Nudgebar.
Not compatible with Bullbar. -
4-head kit.
Applicable to Narrow Body variants.
Not compatible with Nudgebar. -
4-head kit.
Applicable to variants with Alloy Bullbars. -
4-head kit.
Applicable to variants with Premium Steel Bullbars.
Not applicable with Commercial Steel Bullbars. -
Required when fitting Full Size LED Light Bar on Alloy Bullbars
-
Cab-chassis tray variants only. Requires harness: PZQ6000460
When fitting on Tray with Trundle Drawers, must also purchase Accessory Bracket PZQ84AD003. -
Required when fitting LED Light Bar on Steel Bullbars.
-
Required when fitting driving lights (Comet FF 450 or LED Light Bar) on Nudgebars.
-
Cab Chassis – Tray variants only (without Trundle Drawer)
For Tray Body with Trundle Drawers, order 2-head kit instead (PZQ9789020) -
Must be installed with an Alloy or Steel Bullbar.
-
Required to fit reverse camera PZQ9089012 on Tray with Trundle Drawers
-
Not compatible with leather seats
-
Not compatible with leather seats
-
Can only be fitted with accessory Side Steps AND Steel Bull Bar
-
Single Cab Hi-Rider and 4×4 only. Compatible with side rail PZQ4389020.
-
Required when fitting Front Recovery Points to accessory Steel Bull Bar
-
Images are for display purposes only and may differ from actual product.
-
*Suits Single Cab variants fitted with standard GPA Tray Body (2550mm)
Suits Extra Cab and Dual Cab – Cab Chassis variants fitted with tray body.
^Use long tongue towbar if tub-delete conversion/tray body is fitted.
Towbar design maximum capacity – 3500kg. Refer to vehicle Owner’s Manual for vehicle specific towing capacities -
*Suits Single Cab variants fitted with Narrow GPA Tray Body (2400mm)
If tub-delete conversion/tray body is fitted to pick up variants, use long tongue towbar instead (PZQ6489173).
Towbar design maximum capacity – 3500kg. Refer to vehicle Owner’s Manual for vehicle specific towing capacities. -
Suits vehicles fitted with battery terminal and fuse box kit.
Images are for display purposes only and may differ from actual product.
-
Suits vehicles fitted with battery terminal and fuse box kit
-
Suits vehicles fitted with battery terminal and fuse box kit
-
Extra Cab & Single Cab.
Not compatible with Wide Body variants when fitted with a Tray. -
Winch Spring Kit required. Fitment to steel bull bars require winch cradle PZQ9389030 and steel winch fitting kit PZQ298921X.
-
Winch Spring Kit required (excludes Rugged X). Fitment to steel bull bars require winch cradle PZQ9389030 and steel winch fitting kit PZQ298921X.
-
Not required on alloy bullbars. If fitted to steel bullbar, requires PZQ298921X or PZQ2989475 depending on bullbar. Check applicability below.
Images are for display purposes only and may differ from actual product.
Showing 1–48 of 52 results