Latest Products
-
Genuine Toyota Front Corner Park Assist Kit For Massive Gray (1L6)
$344.72
-
Genuine Toyota Rear Park Assist Kit For Massive Gray (1L6)
$285.23
-
Genuine Toyota Front Corner Park Assist Kit For Frosted White (089)
$350.00
-
Genuine Toyota Rear Park Assist Kit For Silver Me. (1L0)
$285.23
-
Genuine Toyota Rear Park Assist Kit For Frosted White (089)
$285.23
-
Max load capacity – 75kg evenly distributed across both bars
Note: Max total load capacity of 90kg when fitted with both vehicle and canopy roof racks -
For use on 6 stud vehicles only with Widebody fenders only. Must use standard 265/65 R17 Tyre.
Must also order Wheel Ornaments, see below for applicable part number.
* Must order 42661-0KQ70 Tyre Label, when fitted to any vehicle that does not come standard with 17″ wheels
Any vehicles with steel wheels must order six OE nuts (90942-01109) to replace the standard vehicle’s nuts. -
For use on 6 stud vehicles only with Widebody fenders only. Must use standard 265/65 R17 Tyre.
Must also order Wheel Ornaments, see below for applicable part number.
* Must order 42661-0KQ70 Tyre Label, when fitted to any vehicle that does not come standard with 17″ wheels
Any vehicles with steel wheels must order six OE nuts (90942-01109) to replace the standard vehicle’s nuts. -
For use on 6 stud vehicles only with Widebody fenders only. Must use standard 265/60 R18 Tyre.
* Must order 42661-0KQ90 Tyre Label, when fitted to any vehicle that does not come standard with 18″ wheels.
Any vehicles with steel wheels must order six OE nuts (90942-01109) to replace the standard vehicle’s nuts. -
Does not include battery. Battery must be no more than 20kgs, 190mm high,176mm wide & 277mm Long. Suits 4×4 and Hi-Rider diesel variants only
-
Not compatible with Over Rail Ute Liners (PC3500K02C or PC3500K01L).
Not compatible with Side Utility Box (PW3B50K000) if Box is fitted on Passenger side.
If also fitting Ute Liner, Ute Liner must be fitted first. -
Not winch compatible.
Must order Bullbar Patch Harness (PZQ8589235 or PZQ8589245), see below for applicability.Max. limits for antenna installation-
Base OD: 42mm; Mass: 1.4kg, Height: 1.2m (RH) or 0.73m (LH).
Due to TSS zone, must fit to outboard area only. -
Winch Cradle included with Bullbar
Must order Bullbar Patch Harness (PZQ8589235 or PZQ8589245), see below for applicability.Max. limits for antenna installation-
Base OD: 42mm; Mass: 1.4kg, Height: 1.2m (RH) or 0.73m (LH).
Due to TSS zone, must fit to outboard area only. -
Max load capacity – 90kg evenly distributed across both bars.
Note: Max total load capacity of 90kg when fitted with both vehicle and canopy roof racks
Note: Vehicle roof rack height and canopy roof rack height misalignment is intentional -
Required when fitting Compact Size LED Light Bar on Alloy Bullbars
Images are for display purposes only and may differ from actual product.
-
Applicable for Nudgebars only.
Required when fitting Comet FF450 driving lights to vehicles with fuse box fitted. -
60 min fitment time when fitted with uteliner
-
- Compatibility: 2020 – Present Toyota HiLux Double Cab Rogue 4×4 – 6AT Diesel, 2020 – Present Toyota HiLux Double Cab Rugged X 4×4 – 6AT Diesel, 2020 – Present Toyota HiLux Double Cab SR 4×2 Hi-Rider – 6AT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab SR 4×2 Hi-Rider – 6MT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab SR 4×4 – 6AT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab SR 4×4 – 6MT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab SR+ 4×4 – 6AT Diesel with Alloys & Nav, 2020 – Present Toyota HiLux Double Cab SR+ 4×4 – 6MT Diesel with Alloys & Nav, 2020 – Present Toyota HiLux Double Cab SR5 4×2 Hi-Rider – 6AT Diesel, 2020 – Present Toyota HiLux Double Cab SR5 4×4 – 6AT Diesel, 2020 – Present Toyota HiLux Double Cab SR5 4×4 – 6MT Diesel, 2020 – Present Toyota HiLux Double Cab Workmate 4×2 Hi-Rider – 6AT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab Workmate 4×2 Hi-Rider – 6MT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab Workmate 4×2 Narrow Body – 5MT Petrol (J-Deck), 2020 – Present Toyota HiLux Double Cab Workmate 4×2 Narrow Body – 6AT Petrol (J-Deck), 2020 – Present Toyota HiLux Double Cab Workmate 4×4 – 6AT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab Workmate 4×4 – 6MT Diesel (J-Deck), 2020 – Present Toyota HiLux Extra Cab SR 4×2 Hi-Rider – 6AT Diesel, 2020 – Present Toyota HiLux Extra Cab SR5 4×4 – 6AT Diesel
-
Dual Cab, MT, Front & Rear
-
Required when fitting Full Size LED Light Bar on Alloy Bullbars
-
Standard LED and Central Locking. 3 piece hard tonneau compatible with sportsbar.
Compatible with A-Deck dust defence kit (PZQ7089A13).
Not compatible with Rail Capping Set (PZQ5589010 or PZQ5589020). -
Standard LED and Central Locking. 3 piece hard tonneau compatible with sportsbar.
Compatible with A-Deck dust defence kit (PZQ7089A13).
Not compatible with Rail Capping Set (PZQ5589010 or PZQ5589020). -
Standard LED and Central Locking. 3 piece hard tonneau compatible with sportsbar.
Compatible with A-Deck dust defence kit (PZQ7089A13).
Not compatible with Rail Capping Set (PZQ5589010 or PZQ5589020). -
Standard LED and Central Locking. 3 piece hard tonneau compatible with sportsbar.
Compatible with A-Deck dust defence kit (PZQ7089A13).
Not compatible with Rail Capping Set (PZQ5589010 or PZQ5589020). -
Standard LED and Central Locking. 3 piece hard tonneau compatible with sportsbar.
Compatible with A-Deck dust defence kit (PZQ7089A13).
Not compatible with Rail Capping Set (PZQ5589010 or PZQ5589020). -
Standard LED and Central Locking. 3 piece hard tonneau compatible with sportsbar.
Compatible with A-Deck dust defence kit (PZQ7089A13).
Not compatible with Rail Capping Set (PZQ5589010 or PZQ5589020). -
Required when fitting LED Light Bar on Steel Bullbars.
-
Required when fitting driving lights (Comet FF 450 or LED Light Bar) on Nudgebars.
-
A deck only.
Not compatible with Utility Boxes and Bed Slide.
Compatible with Auxillary Power Socket Kit, Canopy, HTC, Roller Cover and STC.
If also fitting Aux Power Socket or Roller Cover, Ute Liner must be fitted first. -
Capping for SR5 only.
Not compatible with Canopy, HTC, Roller Cover and STC. -
Must be installed with an Alloy or Steel Bullbar.
-
- Compatibility: 2020 – Present Toyota HiLux Double Cab Chassis SR 4×4 – 6AT Diesel, 2020 – Present Toyota HiLux Double Cab Chassis SR 4×4 – 6MT Diesel, 2020 – Present Toyota HiLux Double Cab Chassis SR5 4×4 – 6AT Diesel, 2020 – Present Toyota HiLux Double Cab SR 4×2 Hi-Rider – 6AT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab SR 4×2 Hi-Rider – 6MT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab SR 4×4 – 6AT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab SR 4×4 – 6MT Diesel (J-Deck), 2020 – Present Toyota HiLux Double Cab SR+ 4×4 – 6AT Diesel with Alloys & Nav, 2020 – Present Toyota HiLux Double Cab SR+ 4×4 – 6MT Diesel with Alloys & Nav, 2020 – Present Toyota HiLux Double Cab SR5 4×2 Hi-Rider – 6AT Diesel, 2020 – Present Toyota HiLux Double Cab SR5 4×4 – 6AT Diesel, 2020 – Present Toyota HiLux Double Cab SR5 4×4 – 6MT Diesel
-
Not compatible with leather seats
Showing 1–48 of 79 results